The residual
chlorine analyzer is an online
residual chlorine analysis instrument. It is composed of a residual chlorine sensor and a residual chlorine meter. It can measure residual chlorine and temperature at the same time. It is widely used in electric power, water supply, medicine, chemical industry, food and other industries. Chlorine is continuously measured. Installation steps of residual chlorine analyzer: 1. First select the position where the detector is installed, then mark the exact position and drill a hole. 2. On the installation surface, tighten or bolt the detector properly horizontally. Be sure to open the upper cover and remove the lower cover before installing the detector. The screws on the cover should be taken away with the cover and cannot be separated, and the opened upper cover should be dragged aside to hang. 3. After the detector is installed, the upper cover can be closed and tightened, and the lower cover can only be closed after all the wires are connected. 4. Mark the position where the analyzer is to be installed and punch holes at the same time. At the same time, properly tighten or bolt the analyzer bracket on the drilled hole, and then clamp the analyzer on the bracket. Precautions for maintenance of residual chlorine analyzer: 1. After turning on the power, the instrument should have a display. If there is no display or the display is abnormal, turn off the power immediately and check whether the power is normal. 2. The secondary meter generally does not need daily maintenance. When there is an obvious fault, please do not open it to repair it yourself. 3. The cable connector must be kept clean, and must not be affected by moisture or water, otherwise the measurement will be inaccurate. 4. The electrode should be cleaned frequently to ensure that it is not polluted. 5. Calibrate the electrodes every once in a while. 6. When the water is cut off, make sure that the electrode is soaked in the liquid to be tested, otherwise its life will be shortened. 7. The use of the residual chlorine analyzer depends largely on the maintenance of the electrode. When the online residual chlorine analyzer uses sterilized tap water as boiler feed water for desalination treatment, the residual chlorine in the tap water must be removed. Because the presence of residual chlorine will destroy the structure of the ion exchange resin, making its strength worse and easily broken.
Every day of the year, there is some city or town in the world that is changing over to for water quality monitoring device.
We are a provider of a various number of services that include . Search our website by water analyzer water quality monitoring device product line or category to find what you are looking for.
It's the consistent experience that builds trust and loyalty. Creating a personality and platform that is scalable will allow you to evolve water analyzer with your consumers.
To do that, Shanghai Boqu Instrument Co., Ltd. will need to make sure our business is listed accurately on as many directories as possible, including technology and quality.