Matters needing attention in electrode maintenance of online residual chlorine analyzer

Residual chlorine online analyzer is a multi-parameter instrument suitable for disinfection applications. It can measure pH/ORP/residual chlorine, temperature and flow at the same time. It has three relay outputs, two current outputs that support proportional control, and RS485 serial interface. , optional pulse output, supports time display and data recording functions. Residual chlorine online analyzer is a multi-parameter instrument suitable for disinfection applications. It can measure pH/ORP/residual chlorine, temperature and flow at the same time. It has three relay outputs, two current outputs that support proportional control, and RS485 serial interface. , optional pulse output, supports time display and data recording functions. Please pay attention to the following points for electrical maintenance of residual chlorine electrode: 1. The electrode should be cleaned regularly. The oxygen permeable membrane should not be broken when disassembling and cleaning the electrode, and the oxygen permeable membrane on the electrode should not be wiped with filter paper to avoid damage to the oxygen permeable membrane. 2. The cable connector must be kept clean and must not be exposed to moisture or water. 3. When the displayed value is very different from the actual value, the electrolyte in the electrode may be dry, and the electrolyte needs to be refilled. Generally, the maintenance work of replacing or adding electrolyte is carried out every 6 months; when the permeable membrane is broken, it is necessary to Replace the spare one-piece membrane head. The electrode needs to be repolarized and calibrated every time the electrolyte is replaced or added or the spare integrated membrane head is replaced. The specific steps are as follows: unscrew the black part of the electrode shield at the lower part of the electrode, remove the spare integrated membrane head, turn the cylinder upside down (don’t let the breathable membrane touch other things), pour the original electrolyte, and integrate Fill the membrane head half-full with electrolyte and then put it into the inner core of the oxygen electrode, let the excess electrolyte drain off, and tighten it to ensure that the membrane can be attached to the head of the electrode core. After replacing the electrolyte, the polarization and calibration should be carried out again. When calibrating, a solution of known concentration must be used as a reference standard for calibration. 4. Electrode polarization: After the electrode is connected to the instrument, it is continuously powered on for more than 2 hours, which is polarization, and the calibration can only be carried out after the electrode is polarized. 5. When the water is cut off for a long time on site or the instrument is not used for a long time, the electrodes should be taken out in time, cleaned and put on the protective cap. 6. If the electrode fails, replace the electrode.
Most places have a few choices when it comes to water quality monitoring device water analyzer distributors, but it can sometimes be difficult to find the right supplier for your needs. The quality of water analyzer is critical to water quality monitoring device.
To build customers value by delivering high-quality products, services and solutions in innovative and cost effective ways. Shanghai Boqu Instrument Co., Ltd. will realize this mission by setting the highest standards in service, reliability, safety and cost containment in our industry.
It's not enough to have an idea as water analyzer in a gigantic market. The key to what gets concerned is how you connect this hungry market to the idea that satisfies it.
By balancing the efficiencies of new technologies with the personal touch of highly trained and motivated professionals, Shanghai Boqu Instrument Co., Ltd. is able to deliver solutions and services that exceed our customers’ expectations. We thereby earn their loyalty.
Shanghai Boqu Instrument Co., Ltd. must adopts new technology and internal procedures to increase responsiveness and mitigate costs going forward.