Expert in Water Quality Measurement and Water Treatment Project Since 2007
E-mail: michael@shboqu.com Whatsapp：86-15000087545
Online Suspended Solids Meter ZDYG-2087
ZDYG-2087 ONLINE SUSPENDED SOLIDS METER
Description of Suspended Solids (Sludge Concentration) Sensor
The total suspended solids sensor is based on the infrared absorption scattered light method and combined with the application of ISO7027 method, can guarantee the continuous and accurate detection of suspended solids and sludge concentration. Based on ISO7027, infrared double scattering light technology will not be affected by chroma for the measurement of cuspended colids and cludge concentration value. According to the usage environment, self-cleaning function can be equipped with. The tss meter assures the stability of data and reliability of performance; with the built-in self-diagnosis function, it can make sure the accurate data is delivered; besides, the installation and calibration are quite simple.
TECHNICAL INDEXES
Technical indexes of tss meter/ total suspended solids sensor
Specifications | Details | |
Size | Diameter 60mm* Length 256mm | |
Main Materials | Main Body:SUS316L (Ordinary Version),Titanium Alloy (Seawater Version) | |
Waterproof Rate | IP68/NEMA6P | |
Measurement Range | 0.01-20000 mg/L、0.01-45000 mg/L 、0.01-120000 mg/L | |
Indication Resolution | Less than ± 5% of the measured value (depending on sludge homogeneity) | |
Pressure Range | ≤0.4Mpa | |
Flow velocity | ≤2.5m/s、8.2ft/s | |
Storage Temperature | -15~65℃ | |
Environment Temperature | 0~45℃ | |
Calibration | Sample Calibration, Slope Calibration | |
Cable Length | Standard 10-Meter Cable, Max Length: 100 Meters | |
Warranty Period | 1 Year | |
High Voltage Baffle | Aviation Connector, Cable Connector | |
External Dimension | ||
SUSPENDED SOLIDS METER
The suspended solid meter can be used to display data measured by the sensor, so the user can get the 4-20mA analog output of the transmitter’s interface configuration and calibration. And our tss meter can make relay control, digital communications, and other functions a reality.
The total suspended solids sensor is widely used in sewage plants, water plants, water stations, surface water, farming, industry and other fields. The transmitter diagram is shown in the figure.
MAIN FEATURES
Main features of TSS meter supplier/ total suspended solids sensor
Specification | Details |
Size | 145*125*162mm L*W*H |
Material of outside shell | Lower casing：Aluminum with powder covering |
Cover：PA66+GF25+FR | |
Waterproof Rate | IP65/NEMA4X |
Storage Temperature | -20 to 70℃ |
Operation Temperature | -15 to 60℃ |
Power Supply | AC：AC220V, 50HZ, 5W DC：DC24V |
Output | Two-way analog output 4-20mA, response parameters and corresponding scope can be programmed; |
Relay | Three-way relay can be set up, and response parameters and response values can be programmed |
Display Output | 128 * 64 dot matrix LCD with LED backlight, which can be operated under the direct sunlight |
Digital Communication | MODBUS RS485 communication function, which can transmit real-time measurements |
Warranty Period | 1 year |
CONTACT US
We will reply you in 8 hours after your message .
Contact Us
Office Add：No. 118 Xiuyan Road,Pudong New Area,Shanghai,Zip Code:201315,China
Contact us right away
BOQU Instrument focus on development and production of water quality analyzers and sensors, including water quality meter, dissolved oxygen meter, pH sensors, etc.
