Expert in Water Quality Measurement and Water Treatment Project Since 2007
E-mail: michael@shboqu.com Whatsapp:86-15000087545
SJG-2083C
ONLINE (NaCL) SODIUM CHLORIDE CONCENTRATION METER
SJG-2083C is inductive type acid alkali concentration meter,it's with inductive conductivity sensor,the measuring principle of the infinite sensor is a pair of wirewound alloy toroidal coils. The probe of the sensor is completely isolated from the measured process solution (non-contact). Two coils, one for transmitter and the other for receiver. When the transmitter coil is energized, the electrolyte solution conducts electricity and generates an induced current, which is directly proportional to the conductivity of the solution. The receiver coil detects the magnitude of this current and thus obtains the conductivity value of the solution. Conductivity probe alloy toroidal coil is customized in the toroidal molding with corrosion resistance. Because the probe of the sensor is completely isolated (non-contact) from the process under test (liquid), frequent maintenance and maintenance are not required.
TECHNICAL PARAMETERS
Product name | SJG-2083C Online (NaCL) Sodium Chloride Concentration Meter |
Sodium Chloride | KOH(0~20.00)%)% |
Accuracy | ±2%F.S |
Resolution | 0.01%; |
Repeatability | <1% |
Temperature sensors | Pt1000 |
Temperature compensation range | 0~60C(PP),0~100C(PP), 0~180 ℃(PFA) |
Ambient humidity | ≤90%RH (without condensation) |
Power supply | AC(85~265) V,Frequency ( 45~65)Hz |
Power comsumption | ≤15W |
Output | 4 - 20 mA |
Communication | RS485 Modbus |
Alarm relay | 2 normally open contacts are optional, AC220V 3A /DC30V 3A |
Overall dimension | 145 mm×120 mm×150 mm |
Protection | IP65 |
MAIN FEATURES
Contact Us
Contact us right away
BOQU Instrument focus on development and production of water quality analyzers and sensors, including water quality meter, dissolved oxygen meter, pH sensors, etc.