Slope Calibration of SD-500P Online Color Meter

Slope cablibration of SD-500P Online Color Meter

1) fill in the Standard buffer in Chamber.(here is 500PCU)

2) Put the cover on.

3) wait around 5 minutes.

4) then move the cursor to "SetSam", 

5) then presse the "Enter" after cursor flashes several time.

6) then Slope calibration finished.

Note：please ensure the Cover on Chamber when calibration, becasue the light will have effect.

SD-500P Online Color Analyzer

1. Color Range:0.1-500.0PCU

2. Resolution:0.1 and 1PCU

3. Storage time:>3 years(8G)

4. Recording interval:0-30 Minutes can be setup, 

5. Default 10 minutes

6. Display mode:LCD

7. Cleaning method:Manual cleaning

8. Working temperature:0~55℃

9. Analog output:4~20mA output

10. Relay output:Four SPDT,230VAC,5A;

11. Fault alarm:two Acousto-optic alarm, 

12. Alarm value and time can be set

13. Power Supply:AC,100~230V,50/60Hz or 24VDC ;power comsumption: 50W

14. Sample flow rate:0mL~3000mL/min,

15. Ensure that the flow rate is no bubbles

16. It will more accuracy in low flow rate for low range measuring

17. Inflow pipeline:1/4" NPT,(Provide external interface)

18. Outflow pipeline:1/4" NPT,(Provide external interface)

19. communication:MODBUS/RS485

20. Dimension:40×33×10cm

BOQU Contact Info:

Contact:Michael Luo

Email:michael@shboqu.com

Mob(skype/whatsapp):86-15000087545

Facotry Address:No. 118 Xiuyan Road,Pudong New Area,Shanghai,zip code:201315,China