Expert in Water Quality Measurement and Water Treatment Project Since 2007
E-mail: michael@shboqu.com Whatsapp:86-15000087545
Turbine flow meters, an innovative velocity measurement device, are extensively utilized across various industries such as aerospace, cryogenics, and custody transfer. These meters, a brainchild of Reinhard Woltman from the 18th century, are known for their precision in measuring liquid and gas flows. The design features a rotor with multiple blades positioned perpendicular to the flow of the fluid. This rotor, slightly smaller than the metering chamber's diameter, spins freely on bearings, with its rotational speed directly correlating to the flow rate of the fluid.
The meter detects turbine rotation through various means, including solid-state devices like reluctance, inductance, capacitive, and Hall-effect sensors or mechanical methods like gear or magnetic drives. In the reluctance method, a coil with a permanent magnet interacts with magnet-attracting turbine blades to generate voltage as each blade passes the coil. This voltage pulse denotes a specific volume of fluid, measured by the meter's K-factor.
The inductance approach uses a permanent magnet in the rotor or magnetized blades, creating voltage pulses as blades pass the coil. Some designs feature a single magnetic blade, each pulse signifying a full rotor revolution. The reluctance and inductive sensor signals are continuous sine waves, with frequency mirroring the flow rate. However, at low flow rates, the weak output signal requires proximity between the sensor and its display electronics or preamplifier.
Turbine meters are recognized for accuracy, commonly expressed as a percentage of the actual rate (% AR). One such meter boasts a remarkable linearity precision of ±0.25% across a flow range of 10:1 and even finer ±0.15% linearity over a 6:1 range. Its key performance indicator's repeatability ranges from ±0.2% to a remarkable ±0.02% within the linear range.
Due to slight variations in manufacturing, every turbine meters undergoes calibration before being dispatched. This calibration establishes the K-factor, indicating the number of pulses per unit volume, which remains within the specified linearity range. Recording multiple K-factors for different flow segments is feasible, enabling electronic adjustments in response to varying flow rates. It's important to note that the K-factor is specific to the fluid for which the meter was originally calibrated.
Barstock turbine meters usually demonstrate a linearity of ±0.25% AR over a 10:1 flow span. For larger meters, this linearity stands at ±0.5% AR across the same range. A notable characteristic of turbine meters is a minor nonlinearity, often referred to as the 'turbine meter hump,' observed in the lower 25-30% of their range. Maintaining the minimum flow above this threshold can achieve a linearity of 0.15% in smaller meters and 0.25% in larger ones. If a 10:1 range doesn’t suffice, certain turbine meters can extend up to a 100:1 turn-down, although this affects accuracy, reducing it to 1% of the full scale.
Turbine meters find their utility in a vast array of sectors, including, but not limited to:
● Oil and Gas
● Water and Wastewater Management
● Gas Utilities
● Chemical Industries
● Power Generation
● Food and Beverage Production
● Aerospace
● Pharmaceutical Manufacturing
● Metal and Mining Operations
● Pulp and Paper Industry
Despite their versatility, turbine meters have certain limitations. Their accuracy diminishes at lower flow rates due to rotor and bearing friction. Hence, operating them above 5% of their maximum flow capacity is advised. High-velocity usage can lead to premature bearing wear, potentially damaging the meter.
When dealing with non-lubricating fluids, there’s an increased risk of bearing wear, which can compromise the meter's accuracy and lead to eventual failure. Frequent bearing replacements may be necessary in such scenarios, escalating maintenance costs.
Using these meters with dirty fluids should be avoided to prevent wear and bearing damage. Since turbine flow meters contain moving parts, they are prone to gradual wear and tear over time and usage.
Furthermore, it's crucial to avoid sudden shifts from gas to liquid flow, as these can stress the meter, affecting its accuracy and potentially causing damage. Conditions like pipe filling, slug flow, and two-phase flow can lead to inaccuracies in turbine meter readings.
Turbine flow meters are renowned for their broad capabilities, especially in managing varying flow rates. They offer an impressive turndown ratio of up to 35:1, catering to diverse flow requirements. One of the key advantages is their cost-effective accuracy, making them a popular choice in many industries. Their construction is both simple and robust, ensuring long-term durability. These meters are also user-friendly in terms of installation and maintenance.
Additionally, turbine flow meters are adaptable when integrated with other instruments for precise flow control. They come with a range of process connection options, enhancing their versatility. These meters can function efficiently across various temperatures and pressures, making them suitable for multiple applications. Another significant benefit is their low-pressure drop, which helps maintain system efficiency. Lastly, they provide convenient signal output for easy monitoring and control.
Boqu Instruments is a renowned water quality analyzer manufacturer that swears on quality and has been serving for decades. We have a range of turbine meters. To know more, visit our website.
Contact Us
Contact us right away
BOQU Instrument focus on development and production of water quality analyzers and sensors, including water quality meter, dissolved oxygen meter, pH sensors, etc.